[{"data":1,"prerenderedAt":19},["ShallowReactive",2],{"knowledge-article-en-food-grade-potato-flakes-specification-coa-bulk":3},{"post":4,"source":17,"fetchedAt":18},{"id":5,"slug":6,"date":7,"modified":8,"lang":9,"title":10,"excerpt":11,"content":12,"seoTitle":13,"seoDescription":14,"categories":15,"featured":16},319,"food-grade-potato-flakes-specification-coa-bulk","2026-11-19T05:35:10.789Z","2026-11-19T09:00:25.675Z","en","Food Grade Potato Flakes | Specification, COA and Bulk Supply","A technical procurement guide for setting food-grade potato flake specifications, comparing COA entries with purchase requirements and approving first and repeat lots.","\u003Ch2>Put the decision rules in the purchase specification\u003C\u002Fh2>\u003Cp>A usable potato flake specification identifies the product and grade, then states the agreed criteria, relevant methods and the documents expected with each shipment. Build the specification around the intended use. A pale fabricated snack may prioritize colour and sugar behaviour, while a mashed potato line may prioritize rehydration and prepared texture. Confirm required declarations, food-safety criteria and market requirements with the people responsible for the finished product.\u003C\u002Fp>\u003Ctable style=\"min-width: 75px;\">\u003Ccolgroup>\u003Ccol style=\"min-width: 25px;\">\u003Ccol style=\"min-width: 25px;\">\u003Ccol style=\"min-width: 25px;\">\u003C\u002Fcolgroup>\u003Ctbody>\u003Ctr>\u003Cth colspan=\"1\" rowspan=\"1\">\u003Cp>Field\u003C\u002Fp>\u003C\u002Fth>\u003Cth colspan=\"1\" rowspan=\"1\">\u003Cp>Define in the agreed specification\u003C\u002Fp>\u003C\u002Fth>\u003Cth colspan=\"1\" rowspan=\"1\">\u003Cp>Check on arrival or on the lot COA\u003C\u002Fp>\u003C\u002Fth>\u003C\u002Ftr>\u003Ctr>\u003Ctd colspan=\"1\" rowspan=\"1\">\u003Cp>Grade and ingredient identity\u003C\u002Fp>\u003C\u002Ftd>\u003Ctd colspan=\"1\" rowspan=\"1\">\u003Cp>Exact grade code and agreed ingredient declaration\u003C\u002Fp>\u003C\u002Ftd>\u003Ctd colspan=\"1\" rowspan=\"1\">\u003Cp>Labels and lot documentation match the approved order\u003C\u002Fp>\u003C\u002Ftd>\u003C\u002Ftr>\u003Ctr>\u003Ctd colspan=\"1\" rowspan=\"1\">\u003Cp>Moisture\u003C\u002Fp>\u003C\u002Ftd>\u003Ctd colspan=\"1\" rowspan=\"1\">\u003Cp>Limit, reporting basis and agreed test method\u003C\u002Fp>\u003C\u002Ftd>\u003Ctd colspan=\"1\" rowspan=\"1\">\u003Cp>Lot result uses the agreed basis and unit\u003C\u002Fp>\u003C\u002Ftd>\u003C\u002Ftr>\u003Ctr>\u003Ctd colspan=\"1\" rowspan=\"1\">\u003Cp>Flake size or fines\u003C\u002Fp>\u003C\u002Ftd>\u003Ctd colspan=\"1\" rowspan=\"1\">\u003Cp>Sieve aperture, portion passing or retained and method\u003C\u002Fp>\u003C\u002Ftd>\u003Ctd colspan=\"1\" rowspan=\"1\">\u003Cp>Data or receiving check reflects the approved particle profile\u003C\u002Fp>\u003C\u002Ftd>\u003C\u002Ftr>\u003Ctr>\u003Ctd colspan=\"1\" rowspan=\"1\">\u003Cp>Appearance and defects\u003C\u002Fp>\u003C\u002Ftd>\u003Ctd colspan=\"1\" rowspan=\"1\">\u003Cp>Reference appearance, sample weight and counting rules\u003C\u002Fp>\u003C\u002Ftd>\u003Ctd colspan=\"1\" rowspan=\"1\">\u003Cp>Specks, colour and visible differences are assessed consistently\u003C\u002Fp>\u003C\u002Ftd>\u003C\u002Ftr>\u003Ctr>\u003Ctd colspan=\"1\" rowspan=\"1\">\u003Cp>Rehydration\u003C\u002Fp>\u003C\u002Ftd>\u003Ctd colspan=\"1\" rowspan=\"1\">\u003Cp>Water, temperature, mixing, rest and evaluation endpoint\u003C\u002Fp>\u003C\u002Ftd>\u003Ctd colspan=\"1\" rowspan=\"1\">\u003Cp>Receiving or line trial is comparable to the approved sample\u003C\u002Fp>\u003C\u002Ftd>\u003C\u002Ftr>\u003Ctr>\u003Ctd colspan=\"1\" rowspan=\"1\">\u003Cp>Application and safety criteria\u003C\u002Fp>\u003C\u002Ftd>\u003Ctd colspan=\"1\" rowspan=\"1\">\u003Cp>Agreed reducing sugar, microbiology or other attributes when relevant\u003C\u002Fp>\u003C\u002Ftd>\u003Ctd colspan=\"1\" rowspan=\"1\">\u003Cp>Result, unit, method and lot match the purchase requirement\u003C\u002Fp>\u003C\u002Ftd>\u003C\u002Ftr>\u003C\u002Ftbody>\u003C\u002Ftable>\u003Cp>Use authoritative public specifications as references when appropriate. For example, the USDA commercial item description for dehydrated white potatoes identifies flakes as a distinct style. The buyer and supplier still need to agree the order-specific criteria and methods. \u003Ca href=\"https:\u002F\u002Fwww.ams.usda.gov\u002Fsites\u002Fdefault\u002Ffiles\u002Fmedia\u002FAA20032H_Potatoes_White_Dehydrated.pdf\">USDA A-A-20032H\u003C\u002Fa>\u003C\u002Fp>\u003Ch2>Read the COA as a lot record\u003C\u002Fh2>\u003Cp>Match the product name, lot or batch identifier and grade on the COA to the physical bags and purchasing paperwork. Check the result, unit and method against the approved specification. Where an item is absent from the COA, confirm whether it was agreed as a per-lot result, a periodic verification or an incoming inspection. A result reported as “pass” is usable only if the purchase agreement defines how that status is established and what supporting data are required.\u003C\u002Fp>\u003Cp>Keep the TDS, COA and agreed specification together. The TDS describes the product or grade. The COA provides data for a named lot. The agreed procurement specification defines the decision criteria for acceptance.\u003C\u002Fp>\u003Ch2>How to Compare a Potato Flakes COA With the Signed Purchase Specification\u003C\u002Fh2>\u003Cp>Review each result against the agreed criterion for the exact flake grade and lot. Check the test method, units and reporting basis before assigning a pass or fail. Label a row pending where the method differs or a required result is missing, then ask quality and the supplier to resolve it under the agreed review procedure. \u003Ca href=\"https:\u002F\u002Fpotatoflourfactory.com\u002Ftechnical\u002Ftechnical-data-library\u002F\">Technical data library\u003C\u002Fa>.\u003C\u002Fp>\u003Ctable style=\"min-width: 50px;\">\u003Ccolgroup>\u003Ccol style=\"min-width: 25px;\">\u003Ccol style=\"min-width: 25px;\">\u003C\u002Fcolgroup>\u003Ctbody>\u003Ctr>\u003Cth colspan=\"1\" rowspan=\"1\">\u003Cp>Check\u003C\u002Fp>\u003C\u002Fth>\u003Cth colspan=\"1\" rowspan=\"1\">\u003Cp>Reconciliation action\u003C\u002Fp>\u003C\u002Fth>\u003C\u002Ftr>\u003Ctr>\u003Ctd colspan=\"1\" rowspan=\"1\">\u003Cp>Moisture or reducing sugars reported on a different basis\u003C\u002Fp>\u003C\u002Ftd>\u003Ctd colspan=\"1\" rowspan=\"1\">\u003Cp>Ask for the original result and stated basis. Confirm the required moisture data and method compatibility before applying any conversion.\u003C\u002Fp>\u003C\u002Ftd>\u003C\u002Ftr>\u003Ctr>\u003Ctd colspan=\"1\" rowspan=\"1\">\u003Cp>Sieve profile reported against different apertures\u003C\u002Fp>\u003C\u002Ftd>\u003Ctd colspan=\"1\" rowspan=\"1\">\u003Cp>Request results for the contract apertures and confirm whether values are percent retained or passing.\u003C\u002Fp>\u003C\u002Ftd>\u003C\u002Ftr>\u003Ctr>\u003Ctd colspan=\"1\" rowspan=\"1\">\u003Cp>Appearance check uses a different sample mass or count definition\u003C\u002Fp>\u003C\u002Ftd>\u003Ctd colspan=\"1\" rowspan=\"1\">\u003Cp>Request reinspection with the agreed method, keeping each sample count traceable to its bag or specified composite.\u003C\u002Fp>\u003C\u002Ftd>\u003C\u002Ftr>\u003Ctr>\u003Ctd colspan=\"1\" rowspan=\"1\">\u003Cp>A result reads only “conforms”\u003C\u002Fp>\u003C\u002Ftd>\u003Ctd colspan=\"1\" rowspan=\"1\">\u003Cp>Check whether the contract accepts that statement. Request a numeric result or the underlying test record if the purchase specification requires it.\u003C\u002Fp>\u003C\u002Ftd>\u003C\u002Ftr>\u003Ctr>\u003Ctd colspan=\"1\" rowspan=\"1\">\u003Cp>One COA covers several identifiers\u003C\u002Fp>\u003C\u002Ftd>\u003Ctd colspan=\"1\" rowspan=\"1\">\u003Cp>Confirm which tested lots are represented and match the corresponding bag or pallet codes.\u003C\u002Fp>\u003C\u002Ftd>\u003C\u002Ftr>\u003C\u002Ftbody>\u003C\u002Ftable>\u003Ch3>Keep the supplier clarification attached to the delivery\u003C\u002Fh3>\u003Cp>Record the contract revision, supplier test reference, buyer result if available, agreed interpretation, and name and date of the reviewer. Where results remain in dispute, use a retained sample or a representative repeat sample under the contract procedure. Keep any agreed exception limited to the applicable lot and use. Update the next purchase order or the approved specification if both parties formally change the method.\u003C\u002Fp>\u003Cp>\u003Cstrong>Buyer FAQ — Can a trader reuse the same spec when buying from another factory?\u003C\u002Fstrong> Keep customer acceptance criteria and the required reporting basis constant. Verify how the second factory tests and reports each item, and qualify the offered grade before treating its COA as comparable.\u003C\u002Fp>\u003Ch2>Release the first lot and manage exceptions\u003C\u002Fh2>\u003Cp>On receipt, check identification, bag and liner integrity, and the traceability information required by your facility. Follow the approved sampling and release procedure. When needed, run the planned rehydration or process check alongside a labelled retained reference. For an unexpected result, hold the affected lot as required by your process and share the lot ID, tested method and comparison observations with the supplier. Agree how results will be reviewed before deciding disposition.\u003C\u002Fp>\u003Cp>For repeat supply, specify which product changes require review, including shifts in grade code, ingredient declaration, pack or test method. When evaluating two offers, compare the actual commercial grade and documentation coverage alongside price, quantity basis, lead time and freight terms.\u003C\u002Fp>\u003Ch3>Is a COA enough to approve a new supplier?\u003C\u002Fh3>\u003Cp>Use it with your supplier approval process, the agreed specification and a representative production trial where needed. Check whether the quoted grade and the tested lot are the same.\u003C\u002Fp>\u003Ch3>What belongs in the first RFQ?\u003C\u002Fh3>\u003Cp>Send the finished application, required specifications and methods, acceptable appearance, packaging, destination and expected order quantity. Ask Junsheng Agriculture which fields can be reported for each lot. Email \u003Ca href=\"mailto:potato@chineseag.com\">\u003Cstrong>potato@chineseag.com\u003C\u002Fstrong>\u003C\u002Fa> for the relevant sample and supply documents.\u003C\u002Fp>","Food Grade Potato Flakes | Specs, COA and Bulk Supply","Write a food-grade potato flake specification, verify a lot COA and define incoming acceptance before placing a bulk supply order.",[],"https:\u002F\u002Fcms.potahub.com\u002Fassets\u002F810644b6-28a1-481e-b824-489f3b06c392","directus",null,1795344606239]